Standard Camber

A slight traditional camber zone for a responsive feel that isn't overpowering. It keeps the board stable and ready for takeoffs, landings, and everything in between.

Directional Shape

More nose than tail, a set-back stance (-19mm), and a sidecut to match. It's built to be ridden in one direction. You can ride it switch, but RIDE is upfront that it won't be as good switch all day.

Urethane Channel

New for the Vantum. Milled-out sections of the core in the nose are filled with urethane, similar to the Slimewall material. It keeps the nose stable and chatter-resistant in the choppiest conditions, so there's no nose flapping around when you're charging through the chop.

Tapered Quadratic Sidecut + Roll-In Construction

Three blended radii improve turn initiation and exit while giving you the best grip possible, and the taper helps the board float in deep snow. Roll-In Construction wraps a 3D structure around the urethane Slimewalls to add strength, prevent topsheet chipping, and reduce weight.

Zonal Carbon Rails + Single Impact Plates + Hybrid Glass

Carbon strips run along each edge from the contact points to the inserts for more direct power transfer. Single Impact Plates under each binding add compressive strength where boards tend to break, and Hybrid Glass (triaxial on top, biaxial on the base) balances torsional flex and stiffness for better response at speed.

Performance Core + Slimewalls + Sintered 4000 Base

High-strength Aspen combined with Bamboo and lightweight Paulownia for a core that's strong and light. Urethane Slimewalls absorb impacts and are some of the most durable sidewalls in snowboarding. The Sintered 4000 base is harder, more durable, and faster than extruded, and it's stone ground flat. Built with plant-based Bio Resin and 30% recycled steel edges.