Expert Wakefoil Kit — Ronix — 2026
|
Who this is for
Experienced wakefoilers who want to maximise glide and pump efficiency on the lake. The 1010cm² is the sweet spot for most riders — a wing that gets you on foil easily, keeps you there longer, and makes pumping back to the second or third wake genuinely achievable. If you want to push top-end speed and precision over glide, see the 910cm² instead.
|
The setup
The 2026 Ronix Expert Velo Carbon 1010cm² is a complete high-aspect wakefoil kit engineered specifically for the energy and rhythm of a wake — not the ocean, not the wind, the wake. Most high-aspect foils demand swell or strong wind to perform. The Velo is different: built from high-grade prepreg spread tow carbon and cured in an autoclave, every component in this kit is optimised for the unique demands of wakefoiling on flat inland water. The 1010cm² front wing is the larger, more forgiving option in the Velo lineup — a wing that provides more lift, a lower stall speed, and the ability to stay on foil even as the wake loses its energy. This is the wing for riders whose goal is to pump back to the second or third wake on Kal Lake and keep flying as long as possible.
High aspect wing guide — 910 vs. 1010
|
Also available
910cm²
Speed & Precision
The narrower wing profile generates less drag at speed, allowing for tighter turns, faster acceleration, and a more direct, athletic feel behind the boat. It requires slightly more board speed to get on foil — but once you’re up, the 910 is a rocket.
|
Best for
Lighter riders • Expert riders pushing top-end speed • Riders who want the most direct connection to the foil
View 910cm² → |
|
|
|
You’re viewing
1010cm²
Pump & Glide
The larger surface area provides more lift and a more forgiving stall speed — you can stay on foil even as the wake loses power, making it the sweet spot for pumping back to the second or third wake. The “forever glide” wing.
|
Best for
Average-sized riders • Anyone prioritising long pump runs • Riders who want maximum time on foil
|
|
|
What makes it work
|
High Aspect Front Wing — 1010cm²
A wake-specific high-aspect wing that delivers superior drag reduction for maximum pump and glide, with the low stall speeds and tight-arcing turns needed for precise transitions behind the boat. The 1010’s additional surface area keeps you on foil longer and makes pumping back to the wake more achievable for more riders on Okanagan Lake.
|
|
|
Velo Carbon Mast — 29”
Spread-tow carbon laminates in a rotating clockwork construction shed over 1 lb. from traditional mast designs. The architecture mirrors your weight shifts rather than resisting them — for a more intuitive, responsive ride. At 29” it strikes the right balance between flight height and control on Okanagan Lake’s flat inland water.
|
|
|
High Aspect Rear Stabilizer — 135cm²
Tapered winglets shed turbulence at speed, giving you a stable, consistent platform to load energy through every turn as your speed climbs. Matched specifically to complement the 1010’s glide-focused character — smooth, stable, and efficient across long pump runs on Kalamalka Lake.
|
|
|
Link 3D Fuselage — 39cm
A streamlined conical Shadow Carbon fuselage connects mast, front wing, and stabilizer into one precise, stiff system. CNC-milled from high-grade alloy for zero variance in fit. Engineered for riders who want extra feedback and snap out of every turn on Kalamalka Lake.
|
|
Kit specs
| Component |
Spec |
| Front Wing |
High Aspect — 1010cm² |
| Rear Stabilizer |
High Aspect — 135cm² |
| Mast |
Velo Carbon — 29” |
| Fuselage |
Link 3D — 39cm |
| Ability Level |
Expert |
Everything included
|
This is a complete foil kit. At $2,999 you get everything you need to get on the water immediately — just add a board:
|
• High Aspect Front Wing (1010cm²)
• High Aspect Rear Stabilizer (135cm²)
• Velo Carbon Mast (29”)
• Link 3D Fuselage (39cm)
• Front Wing Neo Sleeve
• Rear Stabilizer Neo Sleeve
|
• Mast Neo Sleeve
• Padded Foil Kit Bag
• Hardware Case
• +1° Shim & -1° Shim
• T-Handle Tool & Anti-Seize Grease
• Fuselage Tip Protector
|
|
|
You’ll need a board too
This kit includes everything you need to foil — mast, fuselage, front wing, and stabilizer — but not a board. Our recommended pairing is the Ronix Blackbird Superconductor, which is built specifically for high-aspect performance and compatible with this kit’s industry-standard track dimensions. Not sure which board and wing combination is right for your riding style and weight? Come see us in-store and we’ll put it together for you.
|
We stock the 910cm² & 1010cm² in-store, but may sell out. Special orders through our Ronix warehouse can typically be with you within a couple of days — no hassle, no extra cost.
| Questions about the Velo 1010? We can help you choose the right wing, board, and complete setup for your riding style on Okanagan Lake — come see us at 2706 48 Ave, Vernon BC or call 250-542-1515. Free shipping across Canada on orders over $150. |
